It is critical that you measure the current spacing between the slats on your blinds. If you choose the wrong spacing, you will either have ''not enough slats'' or ''too many slats'' when you finish the repair.
• Measure the length of your blind from top to bottom.
• Add 12 inches and then multiply the total by the number of cloth tape ladders needed per blind.
• Divide the total number of inches by 12.
• Round this number up to the next whole number.
• This will be the number of feet needed.
• Cloth tape are sold by the foot or by full roll.
Example for Measuring
"One blind that is 40 inches long with two string ladders."
• 40" + 12" = 52"
• 52" x 2 = 104"
• 104" divided by 12 = 8.6 feet
• Round up to 9 feet.
IDENTIFY YOUR BLIND
