|
|
Please click on the play button
to start video.
|
|
|
|
|
Replace a Tilt Mechanism on Older Hunter Douglas Mini Blinds
|
|
- Remove your blind from the window and lay it on a flat surface. If needed, remove the wand by sliding the cap up the shaft of the tilt mechanism and unhooking the wand. Slide the cap down and off of the shaft.
- Remove the end caps from the end of the head rail.
- With a small flat screwdriver, gently release the retainer clip holding the tilt rod to the tilt mechanism
- With a pair of pliers, spread the head rail apart slightly and remove the faulty tilt mechanism.
- Insert the new tilter. Reattach the retainer clip.
- Reattach the end caps.
- To reattach your wand, remove the cap from the wand tip and slide it up the shaft of the tilt mechanism. Hook the wand through the hole in the shaft. Pull the cap down over the wand tip.
- Now you are ready to rehang your repaired blind.
- Click Here to Purchase new Tilt Mechanisms.
|
|
|
