|
Cloth Tape for Blinds with 2 Inch Slats and 1 - 3/4" Spacing
|
|
CRITICAL NOTE: Carefully measure your spacing as shown on the diagram below. Your current spacing must be 1 3/4" or less. NOTE: If your current spacing is less than this amount you may wind up having extra slats left over.
Click here if your current spacing is 1 11/16".
|
|
|
|
|
- You should always replace all of the ladders on each blind.
- Measure the length of your blind from top to bottom.
- Add 12 inches and then multiply the total by the number of cloth tape ladders needed per blind.
- Divide the total number of inches by 12.
- Round this number up to the next whole number.
- This will be the number of feet needed.
- Cloth Tape Ladders are sold by the foot or full roll.
|
|
EXAMPLE
|
|
|
- "One blind that is 40 inches long with two cloth tape ladders".
- 40" + 12" = 52"
- 52" x 2 = 104"
- 104" divided by 12 = 8.6 feet
- Round up to 9 feet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order Fulls Rolls of 150 Feet
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|