|
Cloth Tape for Blinds with 2 Inch Slats and 1 - 11/16" Spacing
|
|
CRITICAL NOTE: Carefully measure your spacing as shown on the diagram below. Your current spacing must be 1 11/16" or less. If your current spacing is more than this amount you may wind up not having enough slats to cover the entire length of your window.
Click here if your current spacing is 1 3/4".
|
|
|
|
|
- You should always replace all of the ladders on each blind.
- Measure the length of your blind from top to bottom.
- Add 12 inches and then multiply the total by the number of cloth tape ladders needed per blind.
- Divide the total number of inches by 12.
- Round this number up to the next whole number.
- This will be the number of feet needed.
- Cloth Tape Ladders are sold by the foot or full roll.
|
|
EXAMPLE
|
|
|
- "One blind that is 40 inches long with two cloth tape ladders".
- 40" + 12" = 52"
- 52" x 2 = 104"
- 104" divided by 12 = 8.6 feet
- Round up to 9 feet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order Fulls Rolls of 216 Feet
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|